If you have a flat tire, there’s a good chance that one of your nails has gotten caught in the tire. Here’s how to remove a nail from a tire:
1. Locate the nail. It’s likely that the nail is lodged in the tread or the rubber around the circumference of the tire.
2. Use a tire iron to hit the nail hard with the blunt end of the iron. This will break the nail off the end of the tire.
3. Use a wrench to turn the tire iron around the circumference of the nail. This will loosen the nail and it can be easily removed.
How to Fix Nail in Tire – Do It Yourself for $5 Tire Plug Kit
Remove a nail from a tire
If you find a nail in your tire, the first thing you should do is remove it as quickly as possible to avoid puncturing the tire. If you can’t get the nail out yourself, you’ll need to get a tool to remove it.
There are a few different ways to remove a nail from a tire. You can use a standard tire iron, which will create a hole in the tire. Or you can use a pneumatic hammer to break the nail off. If neither of these methods work, you’ll need to get a special nail removal tool.
There are a few different types of nail removal tools. The most common is a claw hammer. This tool has a pointed end that grabs the nail and a hammer head on the other end that breaks the nail off. You can also get a chisel type tool, which has a sharp, wedge-shaped head. This tool is used to break the nail off at the base.
Once you have the tool that you need, you’ll need to position it so that the pointed end is touching the nail and the hammer head is facing the tire. Then, hit the nail with the hammer head, breaking the nail off.
The tools you will need
- A flat head screwdriver
- A tire iron
- A bottle of acetone or nail polish remover
- A grater
- A safety pin
- A piece of wood
- A towel
1. Start by unscrewing the bead of the tire iron. This is the round, metal part at the end of the iron that has a handle.
2. Pry off the nail with the screwdriver.
3. Repeat until all the nails are removed.
4. Pour acetone or nail polish remover into the tire iron and heat it up until it is hot.
5. Place the grater over the nail and grind it off.
6. Use the safety pin to hold the nail while you remove the rest of the nail with the screwdriver.
7. Break off the end of the nail and discard it.
8. Replace the bead on the tire iron and tighten it.
Step one
Get a nail remover that is made specifically for tires. There are many on the market, so find the one that is both easy to use and safe for your nails.
Step two
Put on your safety goggles and gloves. This is important because you don’t want any of the chemicals on your skin to get into your eyes.
Step three
Secure the nail remover to the tire using the included straps.
Step four
Insert the nail remover into the nail.
Step five
Grip the remover with your other hand and pull out the nail. Be sure to use steady, even pressure to avoid puncturing the tire.
Step two
Carefully remove the nail with a pair of pliers. Make sure to grip the nail tightly so that it does not slip out. Apply pressure to the nail with the pliers in a circular motion until the nail pops out.
Step three
If the nail refuses to come out with a standard pair of pliers, you may need to use a pneumatic tool. Put the end of the pliers over the protruding nail and inflate the tool with air until it’s about the size of the nail. Push down on the pliers, and the nail should pop out.
Finishing up
So there you have it, a detailed guide on how to remove a nail from a tire. Whether you’re a professional mechanic or a DIY enthusiast, this guide will help you get the job done quickly and efficiently.
Remember, take care when removing nails from tires, as they can be sharp and damaging if not done correctly. If you do happen to nick the tire or puncture it in any way, be sure to get it fixed as soon as possible.
Conclusion
The best way to remove a nail from a tire is to use a tire iron. You can also use a nail puller, but be careful not to puncture the tire.
