How To Remove A Stripped Nail

How To Remove A Stripped Nail

If you’re like most people, you probably have a few nails that are a bit too long or too short. Or maybe one nail is a little bit too thick or too thin. No matter what the reason, you can easily fix this problem by removing a stripped nail.

How to remove stripped screws – 7 different ways

The Importance Of Removing A Stripped Nail

Stripped nails can be frustrating and time-consuming to fix. But if you know what to do, you can remove a stripped nail in just a few short steps.

First, make sure you have the right tools. You’ll need a pair of tweezers, some rubbing alcohol, a cotton ball, and a nail file.

Next, start by cutting off the nail as close to the quick as possible. This will make it easier to remove the nail.

See also  How To Get Nail Remover Off Wood

Next, use the tweezers to pull the nail out from the quick. Make sure to hold the nail straight as you pull it out.

Once the nail is out, use the cotton ball to clean the area around the quick. Then use the nail file to smooth the edges of the nail.

Finally, put a bandaid over the nail and apply pressure until the bandaid is secure.

How To Remove A Stripped Nail The Right Way

There are many ways to remove a stripped nail. The most common way is to use a nail file. You can also use a nail clipper or a small knife.

The Tools You Need To Remove A Stripped Nail

First and foremost, you will need the right tools to remove a stripped nail. You will need a sturdy pair of pliers, a hammer, a nail file and a sandpaper block.

1. With the pliers, bend the nail slightly so that it forms a “J” shape. This will make it easier to file.

See also  How To Remove Gel X Nail Extensions At Home

2. With the hammer, hit the top of the “J” shaped nail with a light tap. This will break the nail off at the “J” shape.

3. File the broken end of the nail.

4. Hold the nail file perpendicular to the nail and sand the entire nail down to the base. Be sure to keep the file perpendicular to the nail so that you do not round the nail off.

5. Finally, use the sandpaper block to smooth the nail down.

The Steps To Remove A Stripped Nail

Step One: locate the stripped nail.

Step Two: identify the root of the nail.

Step Three: remove the root of the nail.

Step Four: use a pumice stone to smooth the surface of the nail.

Step Five: use a file to shape the nail.

Step Six: use a topcoat to seal the nail.

What To Do After You Remove A Stripped Nail

  1. If the nail is still attached to the skin, use a pincer or scissors to carefully cut the nail free. You can also use a nail clipper that has a transparent guard so you can see what you are doing.

    2. If the nail is detached from the skin, use a sterilized needle to make a small hole in the nail and then use a syringe to inject a alcohol or acetone solution under the nail.

    3. Repeat Steps 1 and 2 until the nail is free.

    4. Apply a topical antibiotic ointment to the area and cover with a bandage.


If you are experiencing a stripped nail, the quickest and easiest way to fix the issue is to use a nail clipper. If the nail is too short to use a clipper, you can use a file to remove the stripped part of the nail. Be sure to use a light touch when filing so as not to damage the nail. Finally, apply a topcoat to the nail to seal in the repairs.

See also  How To Remove Powder Dip Nail Polish

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *